Panasonic FZ-S1 Series - Settings; Power Options Menu; [Userbuttonmanager] App

Settings
Power options menu
You can press and hold (power button) to display the power options menu. From here, you can perform
or set the following commonly-used features.
– Power off
– Restart
– Battery Warm Swap (see “Replacing the battery (Battery warm swap)” (page 17))
– Touch operation mode (page 33)
– Lockdown (page 30)
[UserButtonManager] app
You can customize the unit’s function buttons. Some of the available functions that you can assign to the
buttons are listed below.
– Back
– Home
– Menu
– Barcode reader trigger
– Flashlight
– Launch an app of your choosing
– Capture a screenshot
– Security mode (turns off the screen and sound)
– Display the screen when it is turned off
Changing the functions assigned to the buttons
1. Swipe up the home screen, and then in the app list, tap
[UserButtonManager].
2. Tap next to the item you want to change, and then select the desired function.
Default button assignments
The default button assignments are explained below.
Short press assignments
– Left Side button (for models with a barcode reader)
No function by default.
– Right Side button (for models with a barcode reader)
No function by default.
– Left+Right Side button (for models with a barcode reader)
No function by default.
– Volume up button
Increases the volume.
– Volume down button
Decreases the volume.
Long press (press and hold) assignments
– Left Side button (for models with a barcode reader)
32 Operating Instructions - Reference Manual
Settings