Smart card reader (equipped models only)
IMPORTANT
• Do not insert objects other than the smart card.
• Do not insert a wet card.
• Do not insert a cracked card.
• Wipe dirt off the contact part of the card before use.
• Observe the following to ensure the waterproof and dustproof performance of the unit.
– Make sure the cover is securely closed and locked.
– When closing the cover, make sure there is no debris around the cover.
– Make sure the rubber part of the cover is not damaged, deformed, or peeled off.
Inserting the smart card
1. Slide the cover upward until you hear a click (A), and then lift the cover (B).
IMPORTANT
• When lifting the cover, make sure that your finger does not rub against the rubber part (A) of the cover.
Doing so may damage the rubber part.
46 Operating Instructions - Reference Manual
Smart card reader (equipped models only)
To Next Page
Loading...
