Setting a portable Wi-Fi access point (models with wireless WAN only)
You can use the unit as a Wi-Fi access point to connect other devices that are compatible with wireless
LAN to the Internet.
1. From the home screen, tap [Settings] ® [Network & internet] ® [Hotspot & tethering] ®
[Wi-Fi hotspot].
2. Tap the switch to turn Wi-Fi hotspot on or off.
3. Configure the hotspot name, security type, password, etc. as desired.
Using peer-to-peer Wi-Fi connections (Wi-Fi Direct)
The unit can establish peer-to-peer connections with other devices that are compatible with Wi-Fi Direct.
This allows you to directly send and receive data between the unit and other devices without using a
wireless access point.
1. From the home screen, tap
[Settings] ® [Network & internet] ® [Wi-Fi].
• Make sure that Wi-Fi is turned on.
2. Tap [Wi-Fi preferences] ® [Advanced] ® [Wi-Fi Direct].
3. Select the desired settings and functions as necessary.
• Available devices are displayed under [PEER DEVICES].
26 Operating Instructions - Reference Manual
Connectivity
To Next Page
Loading...
