Panasonic GT05

16
6. Device Setting using GTWIN
The following window is displayed when setting devices on GTWIN.
Setting item
Description
① PLC
Select the unit number when using the PLC multiple connection
function. This item is displayed only when the PLC multiple connection
function is set in the GT configuration setting.
②
Global device
Select when specifying a global device.
③
Local device
Select when specifying a local device.
④ Program block No.
Set the program block number when selecting Local Device. This item
is available only when selecting Local Device.
⑤ Slot No.
Specify a slot number. This item is available only when the device with
slot specification has been selected.
⑥ Device type Select a device type.
⑦
Device No.
Specify a device number.
①
②
③
④
⑤
⑥
⑦