- 151 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
≥ Depending on the Wi-Fi connection method, available Wi-Fi functions differ.
≥ If you select [History], you can set up a Wi-Fi connection that uses the connection settings of a
previously used Wi-Fi function. (l 159)
∫ About the status indicator and the connection status icon when
connected to Wi-Fi
Wi-Fi
Setting Up a Wi-Fi Connection
≥ When this unit is turned on, the Wi-Fi setting confirmation screen may be displayed. Touch
[YES], and set up Wi-Fi setting.
≥ To set up the Wi-Fi setting of this unit using the smartphone application “Image App”, touch
[YES] again. (Refer to “Using the [Wi-Fi Easy Setup] to set up a connection” on page 152.)
≥ To set up Wi-Fi using this unit, touch [NO]. (Refer to “Connecting to a wireless access point”
on page 153.)
Wi-Fi connection
methods
Connecting to a wireless access
point (l 153)
Setting up a direct connection to a
smartphone (l 157)
Available Wi-Fi
functions
≥ [Link to Cell] (l 126)
≥ [Baby Monitor] (l 129)
≥ [Home Cam] (l 132)
≥ [DLNA Play] (l 138)
≥ [Copy] (l 140)
≥ [Live Cast] (l 144)
≥ [Link to Cell] (l 125)
A Lit green
≥ The status indicator is lit green while this unit is
connected to a destination device after completing a
Wi-Fi connection.
≥ When Wi-Fi is disconnected, the status indicator is lit
red again.
B The connection status icon
When connected to wireless access point:
connected to Wi-Fi/ not connected to Wi-Fi
≥ The display will change as follows according to the
radio wave intensity: (Weak) # # #
(Strong).
When directly connected:
connected to Wi-Fi/ not connected to Wi-Fi
To Next Page
Loading...
