Panasonic HC-X1000 - Preparation; Names and Functions of Main Parts

13
(ENG) SQT0477
1 USB terminal [USB 3.0 DEVICE]
2 USB terminal [USB 3.0 HOST]
3 HDMI connector [HDMI] (l 38)
4 Audio input terminals 2 (XLR 3 pin)
[AUDIO INPUT2] (l 19)
5Handle
6 Lens hood release button
7 Audio input terminals 1 (XLR 3 pin)
[AUDIO INPUT1] (l 19)
8 Microphone holder attachment part
(l 18)
9 Lens hood
10 Exhaust opening (cooling fan)
11 Status indicator (l 25)
12 Power switch (l 25)
13 Recording start/stop button (l 31)
14 DC input terminal [DC IN] (l 22)
≥ Do not use any other AC adaptors except the
supplied one.
15 Camera remote jack
[CAM REMOTE] (3.5 mm (0.14 q) mini jack)
It is possible to adjust the focus or iris by
connecting a remote control (commercially-
available).
≥ It is not possible to use the remote control
(commercially-available) in the Intelligent
Auto Mode.
[ZOOM S/S] (2.5 mm (0.1 q) super mini jack)
It is possible to operate zoom operation or
recording start/stop connecting with the remote
control (commercially-available).
≥ Do not connect any equipment except the
remote control (commercially-available) to
the camera remote jack. Brightness of the
image may change or it may not focus when
an equipment other than the remote control
(commercially-available) is connected.
16 Headphone terminal [ ]
17 Video output connector [VIDEO OUT]
(l 38)
18 Audio output connector [AUDIO OUT]
(l 38)
19 Speaker
20 Shoulder strap fixture (l 18)
21 Wi-Fi Transmitter
22 Grip belt (l 17)
23 Inlet (cooling fan)
Preparation
Names and Functions of Main Parts
54
8
7
11
9
10
12
13
14
15
18
17
16
22
21
19
20
23
6
1
2
3
HC-X1000PP-SQT0477_mst.book 13 ページ ２０１４年９月９日 火曜日 午後１時３２分