EasyManua.ls Logo

Panasonic HC-X1000 - Inserting;Removing the Battery; Charging and Recording Time

Panasonic HC-X1000
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
(ENG) SQT0477
1 Connect the AC cable to the battery charger and the AC outlet.
Use the AC cable (K2CA2CA00025; supplied) dedicated for the battery charger.
2 Insert the battery into the battery charger by aligning the arrows.
We recommend using Panasonic batteries (l 12, 20, 21, 47).
If you use other batteries, we cannot guarantee the quality of this product.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time with
doors and windows closed.
Inserting/removing the battery
Install the battery by inserting it in the direction shown in the figure.
Charging and recording time
Temperature: 25 oC (77 oF)/humidity: 60%RH
When using the viewfinder (times in parentheses are when using the LCD monitor)
Please refer to “Owners Manual (PDF format)” for details.
Charging/Recording time
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Recording
format
Maximum
continuously
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBD58 (optional)
[7.2 V/5800 mAh]
6 h 20 min MP4 (LPCM) [4K/60p 150M]
4h30min
(4h15min)
2h20min
(2h15min)
Removing the battery
Make sure that the power switch is set to OFF
and the status indicator is turned off, and then
remove by holding onto it taking care not to
drop. (l 25)
While pressing the battery release button,
remove the battery.
Insert the battery until it clicks and locks.
HC-X1000PP-SQT0477_mst.book 21 ページ 2014年9月9日 火曜日 午後1時32

Table of Contents

Other manuals for Panasonic HC-X1000

Related product manuals