18
SQT0477 (ENG)
∫ Attaching the Shoulder strap
We recommend that you attach the shoulder strap (supplied) before going out of doors to record so
as to avoid dropping this unit.
∫ Attaching the front microphone
≥ The microphone holder is set up so that a 21 mm (0.83 q) external microphone (AG-MC200G:
optional) can be attached. Check in advance whether the microphone you wish to use can be
attached.
1 Attach the microphone holder to the microphone holder attachment part.
≥ Attach by using a commercially available screw driver.
≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
A 20 mm (0.8 q) or longer
B Microphone holder attachment part
C Microphone holder
D Microphone holder screws
HC-X1000PP-SQT0477_mst.book 18 ページ ２０１４年９月９日 火曜日 午後１時３２分
To Next Page
Loading...
