Chapter 6 Playback — Thumbnail operation
- 147 -
6
Power status display
: Displays the remaining battery level while powered with the battery.
: Displayed when powered with the AC adaptor.
7
Cursor
8
Clip that cannot be played back
Displays when the clip cannot be played back in the unit such as standard violation.
9
Page switching button
Switches the page of the thumbnail screen.
[`]: Moves to previous page
[{]: Moves to next page
10
Scroll bar
Indicates which part of the whole thumbnail is currently being viewed.
Display of the clips in the thumbnail screen
1
Thumbnail number
Displays the thumbnail number in [0001] to [9999].
Normally, the number assigned to the clip in the order of recording is displayed.
2
Resume play status
3
Number of recording pixels, system frequency
4
Recording file format, recording codec
5
Protection status of the clip
This is displayed when the clip is protected.
6
Standard time code/clip name
The first 8 digits for the time code when starting shooting of a clip or the file name of the clip are displayed in alphanumeric.
The information to display is set in the [THUMBNAIL] menu → [DISPLAY] → [DATA].
7
Delete selection status
8
Clip that cannot be played back
This is displayed when the clip cannot be played back with the unit because the system frequency is different, etc.
9
Copy selection status
This is displayed when the clip is selected.
フビパ ヒブパフビパ ヒブパ
ヶラュ ブペハペフヶラュ ブペハペフ
00010001
00:00:00.0000:00:00.00
フビパ ヒブパフビパ ヒブパ
ヶラュ ブペハペフヶラュ ブペハペフ
00010001
00:00:00.0000:00:00.00
モヷヤラュ ヱラモヷヤラュ ヱラ
ョラュ ブペハペフョラュ ブペハペフ
00010001
00:00:00.0000:00:00.00
2
7
1
8
9
3
4
6
5
To Next Page
Loading...
