Panasonic HC-X2000 - Page 148

Chapter 6 Playback — Thumbnail operation
- 148 -
Display of clip information
Displays the information of the clip where the cursor is positioned.
1 Move the yellow cursor to the clip to display the clip information.
2 Select the [THUMBNAIL] menu → [CLIP] → [INFORMATION].
The clip information is displayed.
∫ Clip information
1 Clip that cannot be played back
This is displayed when the clip cannot be played back with the unit because the system frequency is different, etc.
2 Thumbnail number
3 Protect status of the clip
: This is displayed when the clip is protected.
4 Thumbnail image
5 Clip name
6 [START TC]
Displays the time code value at the start of the recording.
7 [START UB]
Displays the user bits value at the start of the recording.
8 [DATE]
Displays the date of the recording.
9 [TIME]
Displays the time at the start of recording.
10 [DURATION]
Displays the time length of the clip.
11 [PIXEL/FREQ]
Displays the recording format of the clip.
12 [CODEC]
Displays the recording file format and the recording codec of the clip.
13 [FRAME RATE]
Displays the frame rate for super slow recording.
14 [GAMMA]
Displays the gamma of the clip.
Displayed when the [SYSTEM] menu → [FILE FORMAT] is set to other than [AVCHD].
123
6
45
7
8
9
10
11
12
13
14