Panasonic HC-X2000 - Page 78

Chapter 4 Operation — Menu settings
- 78 -
[VF]
≥ These settings will not affect the images actually recorded.
[BRIGHTNESS]
Adjusts the brightness of the viewfinder.
The items that can be set are as follows.
≥ [j15]…[i15]
(Factory setting: [0])
[COLOR LEVEL]
Adjusts the color level of the viewfinder.
The items that can be set are as follows.
≥ [j15]…[i15]
(Factory setting: [0])
[CONTRAST]
Adjusts the contrast of the viewfinder.
The items that can be set are as follows.
≥ [j15]…[i15]
(Factory setting: [0])
[RED TINT]
Finely adjusts the strength of red on the viewfinder.
The items that can be set are as follows.
≥ [j10]…[i10]
(Factory setting: [0])
[BLUE TINT]
Finely adjusts the strength of blue on the viewfinder.
The items that can be set are as follows.
≥ [j10]…[i10]
(Factory setting: [0])
[VF COLOR]
Sets whether to display video in the viewfinder in color or black and white.
(Factory setting: [ON])
[INDICATOR]
Selects the indicator to display in the output image.
[FULL AUTO]
Switches display/hide of the status when the <AUTO/MANU> switch is at <AUTO>.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[SLOT1/2 STATUS]
Switches display/hide of the status of the card slot and remaining recording capacity.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[2 SLOTS FUNC.]
Switches display/hide of the setting in the [RECORDING] menu → [2 SLOTS FUNC.].
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[STREAMING]
Switches display/hide of the streaming status.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[NETWORK]
Switches display/hide of the wireless LAN connection status.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[ON] Displays in color.
[OFF] Displays in black and white.