Panasonic HC-X2000 - Page 79

Chapter 4 Operation — Menu settings
- 79 -
[BATTERY REMAIN]
Switches display/hide of the power status.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[REC FORMAT]
Switches display/hide of the recording format settings.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[FRAME RATE]
Switches display/hide of the frame rate for super slow recording.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[CLIP NAME]
Switches display/hide of the clip file name to be recorded. Up to 8 characters from the beginning of the file name are displayed.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[REC REMOTE]
Switches display/hide of the control status of the recording start and recording stop on the external equipment connected to the <SDI OUT> terminal
*
and
the <HDMI> terminal.
* Available for use when using .
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[REC MODE]
Switches display/hide of the status of interval recording.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[FBC]
Switches whether to display when the flash band compensation function is activated.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[DRS]
Switches whether to display when the dynamic range stretcher function is operating.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[O.I.S.]
Switches whether to display when the optical image stabilizer function is operating.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[SCENE FILE]
Switches display/hide of the scene file name.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[AREA/FACE]
Switches whether to display when the area mode function or the face detection/tracking AE&AF function is operating.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[AUDIO LEVEL METER]
Switches display/hide of the audio level meter.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
X2000