- 12 -
Charging and recording time
∫ Charging/Recording time
≥ Temperature: 25 oC/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
* This will be the recording mode when the 3D Conversion Lens (optional) is attached.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Battery model number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuous
recordable time
Actual
recordable
time
Supplied battery/
VW-VBN130 (optional)
[7.2 V/1250 mAh]
2h30min
[1080/50p],
[AVCHD 3D]*
1h25min
(1h15min)
55 min
(45 min)
[PH], [HA],
[HG], [HE]
1h30min
(1h20min)
55 min
(50 min)
[iFrame],
[SbS 3D]*
1h35min
(1h20min)
55 min
(50 min)
VW-VBN260 (optional)
[7.2 V/2500 mAh]
4h30min
[1080/50p],
[AVCHD 3D]*
3h5min
(2h45min)
1h55min
(1h40min)
[PH], [HA],
[HG], [HE]
3h15min
(2h50min)
2h
(1h45min)
[iFrame]
3h20min
(2h55min)
2h
(1h45min)
[SbS 3D]*
3h15min
(2h55min)
2h
(1h45min)
Battery capacity indication
≥ The display changes as the battery capacity reduces. ####
If there is less than 3 minutes remaining, then will become red. If the battery
discharges, then will flash.
≥ Screen display will disappear when no touch operation is performed for a specific period of
time. However, it will be constantly displayed when the remaining battery time becomes less
than 30 minutes.
≥ The remaining battery capacity is displayed when using the Panasonic battery that you can
use for this unit. The actual time can vary depending on your actual use.
≥ When using the AC adaptor or batteries made by other companies, the remaining battery
capacity will not be shown.
To Next Page
Loading...
