Panasonic HC-X929 - Wi-Fi Functions and Preparation Steps; Wi-Fi Function [HC-X920];[HC-X929];[HC-X920 M]; Connecting to a Smartphone for Wi-Fi

- 129 -
By linking with Wi-Fi compatible devices, you can use the Wi-Fi functions of [Remote Ctrl], [DLNA
Play], [Live Cast] and [Hom.Monitor].
Before using the respective Wi-Fi functions, check and prepare your device.
≥ For the operations and settings of your device such as the smartphone, please read the
operating instructions of the device.
≥ In this Operating Instructions,
j The smartphone and tablet are indicated as “smartphone”.
A When connecting to a smartphone
1 Install the smartphone application “Image App” on your smartphone. (l 132)
2 Check if the smartphone is an Android™ or iOS device.
When the preparation above is complete, proceed to “Connecting to the smartphone”. (l 139)
B When connecting to a wireless access point
1 Check if the wireless access point is compatible with IEEE802.11b, IEEE802.11g, or
IEEE802.11n.
2 Install the smartphone application “Image App” on your smartphone. (l 132)
3 Check if the smartphone is an Android or iOS device in advance.
When the preparation above is complete, proceed to “Connecting to a wireless access point”.
(l 134)
Wi-Fi [HC-X920]/[HC-X929]/[HC-X920M]
What you can do with the Wi-Fi
function and the preparations
[Remote Ctrl]
Linking with the smartphone, you can operate this unit from a remote
location.
Caution:
Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when you
use this function. Use at your own risk.
Image AppImage App
Image App

