- 139 -
Connecting to the smartphone
Check if your smartphone is compatible with WPS
j If your smartphone is compatible with WPS:
Proceed to the following [Easy Connection (WPS)]
j If your smartphone is not compatible with WPS:
Connecting by entering an SSID and Password (l 140)
You can also connect by scanning the QR code displayed on this unit with a smartphone. (l 140)
1 Press Wi-Fi button.
2 Touch [Wi-Fi Setup].
3 Touch [Direct Connection].
4 Touch [Change connection type].
5 Touch [Easy Connection (WPS)].
6 Set the smartphone to WPS Mode.
[Easy Connection (WPS)]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
When the preparations for the Wi-Fi function (l 129) and the Wi-Fi connection are
complete, you can use the following functions:
j [Remote Ctrl] (l 143)
To Next Page
Loading...
