- 39 -
This makes it easier to view the LCD monitor in bright places including outdoors.
≥ These settings will not affect the images actually recorded.
≥ It is possible to set from the quick menu. (l 33)
≥ When the AC adaptor is in use, the LCD monitor is set to [ON] automatically.
≥ When the LCD monitor is bright, the recordable time with the battery will be shorter.
It adjusts brightness and colour density on the LCD monitor.
≥ These settings will not affect the images actually recorded.
1 Select the menu.
2 Touch / to adjust settings.
3 Touch [ENTER].
≥ Touch [EXIT] to exit the menu screen.
It adjusts the brightness of the viewfinder.
≥ These settings will not affect the images actually recorded.
≥ These can be set with the LCD monitor. Close the LCD monitor and extend the viewfinder after
setting, and confirm the brightness by turning on the viewfinder.
Please refer to page 112.
Please refer to page 113.
[POWER LCD]
: [SETUP] # [POWER LCD] # [ON]
[LCD SET]
: [SETUP] # [LCD SET] # desired setting
[BRIGHTNESS]: Brightness of the LCD monitor
[COLOUR]: Colour level of the LCD monitor
[EVF SET]
: [SETUP] # [EVF SET] # desired setting
[BRIGHT]/[NORMAL]/[DARK]
[HDMI RESOLUTION]
[VIERA Link]
MENU
To Next Page
Loading...
