Panasonic HDC-HS25 - Selecting Operating Modes; Turning the Unit On;Off

26
VQT2B44
Preparation
Setup
3
Selecting a mode
(Turning the unit on/off)
Change the mode to recording, playback or power OFF.
Turn on the power by changing the mode to or while pressing the
lock release button A.
The status indicator lights.
To turn off the power
Change the mode to OFF.
The status indicator B goes off.
HDC-SD20
HDC-TM20
≥ Operate the mode switch while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Status indicator B
OFF
HDC-HS25
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with the status indicator B.
Recording mode (l 46, 50)
Playback mode (l 74, 81)
OFF
HDCSD20&TM20&HS25EB-VQT2B44_mst.book 26 ページ ２００９年１月５日 月曜日 午後２時４４分