64
VQT2B44
Function Effect/Setting method
Wind noise reduction
This is for reducing the wind noise coming into the built-in
microphones depending on the wind strength.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 42)
Select the menu. (l 29)
[RECORD SETUP] # [WIND CUT] # [ON]
Microphone setup
[SURROUND]:
Sound is recorded with
5.1 ch surround microphone.
[ZOOM MIC]:
Directivity of the microphone
is interlocked with the zoom
operation. Sounds near the
front of the unit are recorded
more clearly if you zoom in
(close-up) and surrounding
sounds are recorded more
realistically if you zoom out
(wide angle).
Directivity (sound sensitivity direction) of the built-in
microphones can be adjusted.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 42)
Select the menu. (l 29)
[RECORD SETUP] # [MIC SETUP] # desired setting
≥ This function’s default setting is [SURROUND].
HDCSD20&TM20&HS25EB-VQT2B44_mst.book 64 ページ ２００９年１月５日 月曜日 午後２時４４分
To Next Page
Loading...
