90
VQT2B44
≥ If there is not much remaining capacity in the SD card, a confirmation message asking to copy after
deleting all data on the SD card is displayed. Be aware that deleted data cannot be restored.
1 Change the mode to .
≥ Use a sufficiently charged battery or the AC
adaptor.
2 Select the menu. (l 29)
(When copying from Built-in memory to SD card)
(When copying from SD card to Built-in memory)
≥ When there are relay-recorded scenes in the
built-in memory, a message appears on the
screen. Before copying store all of the relay
scenes in the SD card. (l 92)
(When copying from HDD to SD card)
(When copying from SD card to HDD)
3 Touch the desired item.
[Video&Picture]:
All scenes are copied in order of motion pictures,
then still pictures.
Proceed to step 7.
[VIDEO]:
Motion pictures are copied.
[PICTURE]:
Still pictures are copied.
4 (Only when [VIDEO]/[PICTURE] is selected
in step 3)
Touch the desired item.
[ALL SCENES]:
All motion pictures or still pictures are copied.
Proceed to step 7.
[SELECT SCENES]:
Some motion pictures or still pictures are
selected for copying.
[SELECT DATE]:
Copy by selecting the date.
5 (Only when [SELECT SCENES] is selected
in step 4)
Touch the scene/still picture to
be copied.
≥ When touched, the scene/still picture is
selected and the indication appears on the
thumbnails. Touch the scene/still picture again
to cancel the operation.
≥ Up to 99 scenes/still pictures can be set in
succession.
Copying
[COPY] # [] # [YES]
[COPY] # [] # [YES]
[COPY] # [] # [YES]
[COPY] # [] # [YES]
HDCSD20&TM20&HS25EB-VQT2B44_mst.book 90 ページ ２００９年１月５日 月曜日 午後２時４４分
To Next Page
Loading...
