34
VQT2B44
Preparation
Setup
6
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and perform steps 2 to 3 below to set the date and time.
¬Change the mode to .
1 Select the menu. (l 29)
2 Touch the date or time to be set,
then set the desired value using
/.
≥ The year will change as follows:
2000, 2001, ..., 2039, 2000, ...
≥ The 24-hour system is used to display the time.
≥ appears on the right top of the screen
when [SET WORLD TIME] (l 36) is set to
[HOME], while appears when it is set to
[DESTINATION].
3 Touch [ENTER].
≥ The clock function starts at [00] seconds.
≥ A message prompting for World time setting
may be displayed. Perform the World time
setting by touching the screen. (l 36)
≥ Touch [EXIT] or press the MENU button to exit
the menu screen.
Changing the date and time display mode
Select the menu. (l 29)
[SETUP] # [DATE/TIME] # desired display
style
≥ You can also show or change the date and
time display by repeatedly pressing the DATE/
TIME button on the remote control.
[SETUP] # [CLOCK SET] # [YES]
[DATE] [D/T]
[OFF]
12:34
15. 11. 2009
15. 11. 2009
HDCSD20&TM20&HS25EB-VQT2B44_mst.book 34 ページ ２００９年１月５日 月曜日 午後２時４４分
To Next Page
Loading...
