Panasonic HDC-HS250P - Connecting to the AC Outlet; AC Power Connection Steps

23
VQT1Y31
Important:
While the DC cable is connected to the AC adaptor, the battery will not charge.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also, do
not use the AC cable from other equipment with this unit.
A DC output terminal
B DC input terminal
Insert the DC cable matching the [ ] mark of the DC input terminal.
1 Connect the AC cable to the AC adaptor and the AC outlet.
2 Connect the DC cable to the AC adaptor.
3 Connect the DC cable to the DC input terminal [DC IN].
≥ Make sure to set the mode to OFF and that the status indicator is turned off when disconnecting the
AC adaptor.
Connecting to the AC outlet


DC IN

HDCHS250P-VQT1Y31_eng.book 23 ページ ２００９年１月２０日 火曜日 午前１１時１８分