Panasonic HDC-HS700P - Table of Contents

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precautions -----------------------------------------------3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.)--------3
1.4. How to Discharge the Capacitor on Flash
P.C.B.----------------------------------------------------------4
2Warning--------------------------------------------------------------5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord (For EB/GC) ---------------------6
2.4. How to Replace the Lithium Battery-------------------7
3 Service Navigation------------------------------------------------8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------8
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
3.5. Precautions for Handling HDD------------------------ 10
3.6. Formatting-------------------------------------------------- 14
4 Specifications ----------------------------------------------------15
5 Location of Controls and Components------------------ 18
6 Service Mode-----------------------------------------------------21
6.1. Drive Information Display ------------------------------22
6.2. HDD Self Check Execution ----------------------------22
6.3. Lock Search History Indication -----------------------23
6.4. Power ON Self Check Result Display--------------- 23
6.5. HDD Hardware Test ------------------------------------- 24
7 Service Fixture & Tools ---------------------------------------25
7.1. When Replacing the Main P.C.B. --------------------25
7.2. Service Position ------------------------------------------25
8 Disassembly and Assembly Instructions--------------- 27
8.1. Disassembly Flow Chart--------------------------------27
8.2. PCB Location----------------------------------------------27
8.3. Disassembly Procedure -------------------------------- 28
9 Measurements and Adjustments -------------------------- 47
9.1. Electric Adjustment -------------------------------------- 47
10 Factory Setting--------------------------------------------------- 49
10.1. How To Turn On The Factory Settings?------------ 49
10.2. What Is The Factory Settings? ----------------------- 50