Why Panasonic HDC-SD40 Camcorder turns off automatically?
If your Panasonic Camcorder turns off automatically, and the unit turns off when you turn off the power to the TV using the TV remote control, the VIERA Link is at work. If you are not using the VIERA Link, set [VIERA Link] to [OFF].
Why Panasonic Camcorder remaining battery indication is not displayed properly?
If the remaining battery capacity indication on your Panasonic Camcorder is incorrect, fully charge the battery, allow it to fully discharge, and then charge it completely again.
Why VIERA Link is not working on Panasonic HDC-SD40 Camcorder?
To troubleshoot VIERA Link issues with your Panasonic Camcorder: 1. Ensure you are using a HDMI mini cable (optional). 2. Set [VIERA Link] to [ON]. 3. Try turning the unit off and then back on again. 4. If the TV input doesn't switch automatically, use the TV remote to manually switch the input. 5. Check the VIERA Link settings on the connected device.
How to fix Panasonic Camcorder auto focus not working?
If the auto focus on your Panasonic Camcorder isn't working, try switching to Intelligent Auto Mode. Alternatively, if you're recording a scene that's difficult to focus on in Auto Focus Mode, switch to Manual Focus Mode and adjust the focus manually.
Why Panasonic Camcorder video or audio is not output to TV?
If you're not getting video or audio output from your Panasonic Camcorder when connected to the TV, first, consult your TV's operating instructions to select the correct input channel. Also, adjust the [TV ASPECT] setting on the camcorder to match your TV's aspect ratio. Finally, ensure the unit's settings are correct for the type of cable you are using to connect to the TV.
Why does my Panasonic HDC-SD40 Camcorder arbitrarily stop recording?
If your Panasonic Camcorder stops recording unexpectedly, it could be due to a few reasons. The SD card's data writing speed may have decreased, or repeated recording and deletion could be the cause. Use an SD card specifically designed for motion picture recording. You can also format the SD card or built-in memory using the camcorder. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF].
What to do if Panasonic HDC-SD40 is on but not working?
If your Panasonic Camcorder is on but not working correctly, try removing the battery or AC adapter, waiting about a minute, and then reconnecting it. Wait another minute before turning the unit back on. If the issue persists, disconnect the power and contact consumer support.
Why is there no video or audio output from my Panasonic HDC-SD40 Camcorder to TV?
If your Panasonic Camcorder is connected to the TV correctly but there is no video or audio output, or the images are squeezed horizontally, read the operating instructions of your TV and select the channel that matches the input used for the connection. Also, change the [TV ASPECT] setting to match the aspect ratio of the TV and change the setting of the unit depending on the cable connecting to the TV. Check the screen of the unit if the TV screen is not displayed during recording or when PRE-REC is set. Note that audio is not output from the TV during recording mode.
What to do if Panasonic HDC-SD40 is not detected by PC via USB?
If your Panasonic Camcorder is not detected by the PC when connected by the USB cable: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Try a different USB terminal on the PC. * Ensure you are within the operating environment. * Restart the PC and the unit, then reconnect the supplied USB cable.
General| Digital zoom | 1200 x |
|---|---|
| Optical zoom | 16.8 x |
| Image stabilizer | Yes |
| Focal length range | 2.9 - 48.7 mm |
| Focal length (35mm film equivalent) | 42.9 - 721 mm |
| Sensor type | MOS |
| Total megapixels | 1.5 MP |
| Optical sensor size | 1/5.8 \ |
| Effective megapixels (movie) | 1.19 MP |
| Interface | USB 2.0 |
| Video out | 1 |
| Power requirements | AC/DC, 3.6 - 5.0 V |
| Power consumption (typical) | 7.7 W |
| Display diagonal | 2.7 \ |
| Maximum video resolution | 1920 x 1080 pixels |
| Image formats supported | JPG |
| Still image resolution(s) | 1920 x 1080 |
| Audio system | Dolby Digital |
| Camera shutter speed | 1/25 - 1/8000 s |
| Shutter speed (photo) | 1/25 s |
| Shutter speed (video) | 1/8000 s |
| Minimum illumination | 1 lx |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Compatible memory cards | SD, SDHC, SDXC |
| Product color | White |
| Bundled software | HD Writer LE 1.0 |
Weight and Dimensions| Depth | 108.5 mm |
|---|---|
| Width | 51.5 mm |
| Height | 57.5 mm |
| Weight | 169 g |
To Next Page
