With other products
104
VQT1G66
[1080i]: When connecting to the component terminal on the TV compatible with 1080i.
(Playback is in high definition quality.)
ª If the image or audio from this unit is not output on the TV
≥ Check that the plugs are inserted as far as they go.
≥ Check the connected terminal.
≥ Check the TV’s input setting (input switch). (For more information, please read the operating
instructions for the TV.)
≥ If the images are not displayed correctly on a wide-screen TV, adjust the setting in screen mode on
the TV. (For more information, please read the operating instructions of the TV.) If the pictures are
displayed squeezed horizontally on a regular TV (4:3), change the setting on this unit. (l 105)
≥ Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a TV with the AV cable (supplied).
A AV cable (supplied)
≥ If your TV is not equipped with AV Input Sockets, the 21-pin Adaptor B (optional) is necessary.
Consult your dealer.
2 Set the mode dial to to turn on the power.
3 Select the input channel on the TV.
Example:
Select the [Video 2] channel etc.
(The name of the channel may differ depending on the cable.)
4 Start playback on this unit.
The image and audio are output on the TV.
3 Connecting with the AV cable (supplied)
ＲＡＭ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
‑ＲＷ
ＨＤ
ＨＤ
‑Ｒ
ＨＤ
ＨＤ
‑Ｒ
ＤＬ
VIDEO
PHOTO
ＲＡＭ
‑ＲＷ（ＶＲ）
‑ＲＷ（Ｖ）
‑Ｒ
‑Ｒ
ＤＬ
HDC-SX5-VQT1G66_mst.book 104 ページ ２００７年７月２４日 火曜日 午後５時５６分
To Next Page
Loading...
