123
VQT1G66
With a computer
3 Verify the following items are
displayed.
ª If the driver has been recognised
properly
When using a disc:
≥ [MATSHITA HDC-SX5(DVD) USB Device] is
displayed at [DVD/CD-ROM drives].
≥ [USB Mass Storage Device] is displayed at
[Universal Serial Bus controllers].
When using an SD card:
≥ [MATSHITA HDC-SX5(SD) USB Device] is
displayed at [Disc drives].
≥ [USB Mass Storage Device] is displayed at
[Universal Serial Bus controllers].
ª If the driver has not been
recognised properly
[!] or [Unknown device] appears at [Universal
Serial Bus controllers] or [Other devices], etc.
(Where the display will appear depends on the
type of computer you are using.)
You can use the following method to enable it to
be recognised.
Method 1:
Turn off the unit and your computer once and try
again.
Method 2:
Eject the disc or SD card and try verifying again.
Method 3:
Try connecting the unit to another USB port on
your computer.
Using HD Writer 2.0E for SX/
SD
≥ When using HD Writer 2.0E for SX/SD on
Windows XP/2000, log on to your computer as
Administrator (or with a login name equally
authorized). If you log on with a login name
other than Administrator, you cannot use the
applications.
≥ When using HD Writer 2.0E for SX/SD on
Windows Vista, log on to your computer as
Administrator (or with a login name equally
authorized) or with the user name for a
standard user account. If you log on with a
user name for a guest user account, the
software cannot be used.
ª Copying data on a disc or an SD
card to the hard disk of the
computer
1 Connect this unit to the AC
adaptor.
≥ If a battery is used, operation is not possible
when this unit is connected to a computer.
2 Insert a disc or card with
recorded images in the unit, then
turn on the unit.
HDC-SX5-VQT1G66_mst.book 123 ページ ２００７年７月２４日 火曜日 午後５時５６分
To Next Page
Loading...
