124
VQT1G66
With a computer
3 Connect this unit and a
computer.
A USB cable (supplied)
The USB function selection screen will appear.
≥ Insert the plugs as far as they will go. The unit
and computer will not operate properly if the
plugs are not inserted fully.
≥ Do not use any other USB connection cables
except the supplied one. (Operation is not
guaranteed with any other USB cables.)
4 Select [PC CONNECT (DISC)] or
[PC CONNECT (CARD)] and then
press the cursor button.
This unit is automatically recognised by the
computer.
5 (On the computer)
Select [start] #
[All Programs (Programs)] #
[Panasonic] # [HD Writer 2.0E]
# [HD Writer].
The HD Writer 2.0E for SX/SD introductory
screen is displayed. If [OK] is clicked, the
software will start.
6 Click the [Copy to PC] button.
7 Click the [Start copying] button.
≥ A confirmation message appears. Click [Yes]
and copying starts.
≥ If you switch from an SD card to a disc or a
disc to an SD card, first disconnect and then
reconnect the USB cable, click the [Refresh]
button and then select [PC CONNECT (DISC)]
or [PC CONNECT (CARD)] again.
ª Playing back the high definition
images on the computer
≥ Start HD Writer 2.0E for SX/SD.
1 Click the [Start Playback] button.
HDC-SX5-VQT1G66_mst.book 124 ページ ２００７年７月２４日 火曜日 午後５時５６分
To Next Page
Loading...
