75
VQT1G66
Recording
The automatic white balance function may not
reproduce natural colours depending on the
scenes or lighting conditions. If so, you can
adjust the white balance manually.
¬Rotate the mode dial to select or
.
1 Set the AUTO/MANUAL/FOCUS
switch to MANUAL.
The icon shown in the illustration is displayed
automatically.
2 Move the cursor button up to
select [ ].
3 Move the cursor button left or
right to select the white balance
mode.
[ ]: Auto white balance adjustment
[ ]: Indoor mode (for recording under
incandescent lamps)
≥ Incandescent lights, halogen lamps
[ ]: Outdoor mode
≥ Outdoors under a clear sky
[ ]: Manual adjustment mode
≥ Mercury-vapor lamps, sodium lamps,
some fluorescent lights
≥ Lights used for wedding receptions at
hotels, stage spotlights in theatres
≥ Sunrise, sunset etc.
To restore to the automatic adjustment
Set the white balance mode to [ ].
≥ You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
1 Select [ ], fill the screen with a
white subject.
2 Move the cursor button up to
select [ ].
≥ When the [ ] display changes from flashing
to on, setting is complete.
≥ When the [ ] display continues flashing, the
white balance cannot be set because the place
is dark etc. In this case, use the automatic
white balance.
White balance
This is for recording in natural
colours.
ＲＡＭ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
‑ＲＷ
ＨＤ
ＨＤ
‑Ｒ
ＨＤ
ＨＤ
‑Ｒ
ＤＬ
VIDEO
PHOTO
ＲＡＭ
‑ＲＷ（ＶＲ）
‑ＲＷ（Ｖ）
‑Ｒ
‑Ｒ
ＤＬ
To set the white balance manually
AWB
AWB
HDC-SX5-VQT1G66_mst.book 75 ページ ２００７年７月２４日 火曜日 午後５時５６分
To Next Page
Loading...
