Panasonic HDC-SX5 - Using the Menu Screen

44
VQT1G66
Setup
Using the menu screen
Refer to “Menu list” (l 128) for information about
the menus.
1 While stopped, press the MENU
button.
The menu displayed differs depending on the
position of the mode dial.
≥ Do not switch the mode dial when the menu is
displayed.
2 Move the cursor button up or
down in order to select the
desired top menu A.
3 Move the cursor button right or
press the cursor button.
The submenu B is displayed.
4 Move the cursor button up or
down in order to select the
submenu item.
C Current settings on menus
5 Move the cursor button right or
press the cursor button.
6 Move the cursor button up or
down in order to select the
desired item.
7 Press the cursor button to enter
the selection.
To get back to the previous screen
Move the cursor button left.
MENU
A
B
C
HDC-SX5-VQT1G66_mst.book 44 ページ ２００７年７月２４日 火曜日 午後５時５６分