EasyManua.ls Logo

Panasonic HDC-TM350 - Charging and Recording Time

Panasonic HDC-TM350
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
VQT2H62
Charging/Recording time
Temperature: 25 oC/humidity: 60%
When using the viewfinder (times in parentheses are when using the LCD monitor)
* The battery pack holder kit VW-VH04 (optional) is necessary.
These times are approximations.
The indicated charging time is for when the battery has been discharged completely. Charging
time and recordable time vary depending on the usage conditions such as high/low temperature.
The actual recordable time refers to the recordable time when repeatedly starting/stopping recording,
turning the unit on/off, moving the zoom lever etc.
The batteries heat up after use or charging. This is not a malfunction.
Charging and recording time
Battery model
number
[Voltage/Capacity
(minimum)]
Charging time
Maximum
continuously
recordable time
Actual recordable
time
Supplied battery/
VW-VBG130
(optional)
[7.2 V/1250 mAh]
2h35min
1h50min
(1 h 45 min)
1h5min
(1 h 5 min)
VW-VBG260
(optional)
[7.2 V/2500 mAh]
4h40min
3h30min
(3 h 20 min)
2h10min
(2 h 5 min)
VW-VBG6
(optional)
*
[7.2 V/5400 mAh]
9h25min
8h40min
(8 h 15 min)
5h20min
(5 h 5 min)
Battery capacity indication
The display changes as the battery capacity reduces. ####
If there is less than 3 minutes remaining, then will become red. If the battery discharges,
then ( ) will flash.
The remaining battery capacity is displayed when using the Panasonic battery that you can use for
this unit. It may take time to display the remaining battery capacity. The actual time can vary
depending on your actual use.
The maximum amount of remaining battery capacity able to be indicated is 9 hours 59 minutes. If
the actual remaining time exceeds 9 hours 59 minutes, the indication will stay green and will not
change until the remaining time falls below 9 hours 59 minutes.
When changing modes, the time indication will turn off momentarily in order to recalculate the
remaining battery capacity time.
When using the AC adaptor or batteries made by other companies, the remaining battery capacity
will not be shown.

Table of Contents

Related product manuals