72
VQT2H62
Recording
Recording
(Advanced)
4
Recording with manual focus
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use manual focus.
¬Change the mode to or .
Press the FOCUS button.
≥ MF appears on the screen.
A Rotate the multi manual ring to adjust the focus.
1 (When MF assist function is used)
Select the menu. (l 22)
≥ It is possible to set from the quick menu.
(l 23)
≥ This function’s default setting is [ON].
2 Adjust the focus by rotating the
ring.
The centre of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥ The centre of the screen is not enlarged when
[MF ASSIST] is [OFF].
≥ Press the FOCUS button again to restore to
auto focus.
≥ Zoom operation cannot be performed using the
multi manual ring.
≥ MF assist does not work when the digital zoom
is used.
≥ The part of the screen that is enlarged is not
enlarged on the image actually recorded.
FOCUS
[RECORD SETUP] # [MF ASSIST] # [ON]
To Next Page
Loading...
