43
VQT2H62
Recording
Recording (Basic)
3
Recording still pictures
1 Change the mode to .
2 Open the LCD monitor or extend
the viewfinder.
3 Select the media to record from
the menu. (l 39)
Select whether to record still pictures to the
SD card or the built-in memory.
≥ You cannot set the recording media for motion
pictures and still pictures separately.
4 Press the button halfway.
(For auto focus only)
Focus indication and focus area
appear and the unit focuses on the
subject automatically.
≥ If you set the optical image
stabilizer function (l 52) to /
(MODE1), then the image stabilizer function
will be more effective. ( (MEGA optical
image stabilizer) will be displayed.)
≥ The AF assist lamp lights in dark places.
Focus indication:
A Focus indication
± (The white lamp flashes.):
Focusing
¥ (The green lamp lights up.):
When in focus
No mark:
When focusing is unsuccessful.
B Focus area (area inside brackets)
5 Press the button fully.
≥ The sound cannot be recorded while recording
still pictures.
≥ If the button is pressed fully all at once, it
may take time to record still pictures.
≥ It is recommended using a flash or tripod when
recording still pictures in dark places because
the shutter speed becomes slow.
≥ The screen will become darker when the
button is pressed halfway if the shutter speed
is 1/25 or slower.
≥ Rotate the mode dial while at the same
time pressing in the lock release button A
if changing from OFF to another mode.
≥ Align with the mark B.
To Next Page
Loading...
