Panasonic HX-WA2 - Recording Audio; Intelligent Auto Mode

36 VQT4F16
≥ Audio is recorded to the SD card if one is inserted. If no SD card is
inserted, the audio is recorded to the built-in memory.
1 Open the LCD monitor.
2 Select the menu. (l 40)
3 Start recording by pressing the recording start/stop
button.
4 Press the recording start/stop button again to stop
recording.
The modes (appropriate for the condition) are set just by pointing the unit
to what you want to record.
Basic
Recording audio
[MENU]: # [REC MODE] # [ (VOICE RECORD)]
Basic
Intelligent Auto Mode
1
Press the button to
switch to Intelligent Auto
Mode.
Simplified-HX-WA2EG-VQT4F16_mst.book 36 ページ ２０１２年２月６日 月曜日 午後４時１０分