Panasonic HX-WA3 - Page 103

- 103 -
The timer can be used to record images or audio.
When Ø2 (2 sec) is selected
When you press the button or the recording start/stop button, the
status indicator flashes red for approximately 2 seconds, then recording
begins.
On the LCD monitor, an indication of ( # ) appears
to notify you of the recording timing.
When Ø10 (10 sec) is selected
When you press the button or the recording start/stop button, the
status indicator flashes red for approximately 10 seconds, then recording
begins.
On the LCD monitor, an indication of ( # #
# # ) appears to notify you of the
recording timing.
≥ After the recording, the self-timer setting is cancelled.
To stop the timer midway through
Press the button or the recording start/stop button.
[SELF TIMER]
[MENU]: # [SELF TIMER] # desired setting
(OFF): Cancel the setting
Ø2 (2 sec): Records after 2 seconds
Ø10 (10 sec): Records after 10 seconds
2