- 153 -
You can dub by connecting an AV cable.
≥ Be sure to use a sufficiently charged battery.
≥ Connecting the AV cable in the wrong direction may cause damage to
the USB/AV connector of the unit. If the connector has become
damaged, it may not operate correctly, including failure to recognise
the cable even if it has been connected.
≥ Images are dubbed in standard quality.
≥ Set to Playback Mode. (l 38)
Copy/Dubbing
Dubbing images onto other video
devices
Change the video input
on the video device and
TV that this unit is
connected to.
≥ The channel set will differ
depending on the terminal to
which the unit is connected.
≥
See the operating instructions of
the video device for details.
≥ Insert the plugs as far as
they will go.
≥ Do not use any other AV
cables except the supplied
one.
A AV cable (supplied)
B Turn the side with the
symbol up to connect.
To Next Page
Loading...
