- 156 -
2 Select the item to set using the SET button and press
the SET button.
≥ The setting at the time of purchase is [OFF]. Every time the Eye-Fi card
is removed from the unit, this setting is set to [OFF].
≥ If you select [ALL], all files that can be transferred are automatically
transferred. To cancel the file transfer, turn off the unit or set to [OFF].
3 (When [SELECT] is selected in Step 2)
Select the file to transfer using the SET button and
press the SET button.
≥ The selected file is set to be transferred, and (green) is displayed.
To cancel, press the SET button again.
≥ Up to 255 files can be selected in succession.
4 Press the button or the recording start/stop
button.
≥ A confirmation screen for the selection transfer appears.
ALL: Transfers all files that can be transferred.
SELECT: Transfers only selected files.
OFF: Cancels the setting.
To Next Page
Loading...
