Panasonic Hybrid IP-PBX - Installing the IP-EXT16 Card in the Hybrid IP-PBX

20 Getting Started
Setting the Extension Port for Using DSS Console
For ISDN trunk user (MSN Setting):
1. Double-click "CO & Incoming Call".
2. Double-click "DIL Table & Port Setting".
3. Click the "DDI / DID / TIE / MSN" tab.
4. Set the "Incoming Type" of the desired
ports to "MSN".
5. Click [OK].
6. Double-click "MSN Table".
7. Click the "Main" tab.
8. For necessary items, enter the proper
numbers and selections.
9. Click [OK].
1. Double-click "Configuration".
2. Double-click "Extension Port".
3. Change the connection of the desired port
to OUS.
4. For DPT Property, set the Type to "DSS"
and assign the Location number.
5. Click [OK].
6. Double-click "Extension".
7. Double-click "DSS Console".
8. Double-click "Main".
9. Type the Pair Extension Number.
10. Click [OK].
11. Double-click "Flexible Key".
12. For necessary items, enter the proper
numbers and selections.
13. Click [OK].