Panasonic JS-960 Series - 5-1. MSR ISO and JIS Test Procedures; 5-3. VFD2 L Display and Audio Tests; 5-5. LCD Color and SW Tests; 5-7. LED Indicator and Fingerprint Tests

5-3. VFD2L
This is 2 lines Customer Display test.
Click “Test”, then check Customer Display.
5-4. Audio
This is Spearker test.
Clickt “Test”, then check Spearker sounds.
5-5. LCD Color
This is LCD test.
Click “Test”, then check LCD color. When you touch screen, LCD color changes.
5-6. LCD SW
This is LCD Backlight test.
Click “Test”, then check LCD blinking.
5-7. Led test
This is test of LED bottom of display unit.
Click “Test”, then check LED blinking.
5-8. FingerPrint
This is Fingerprint Reader test.
Click “Test”, then touch the Fingerprint Reader. Check the result.
5-9. CD1, CD2 and CD3
This is Cash Drawer 1, 2 and 3 tests.
You have to connect Cash Drawer 1, 2, and 3.
Click “Test”, then PE Diag request to input Password.
When you enter the Password, CD will be opened.
Password is daily changed.
For example, today is 7/25 (July 25),
Today’s password = 0725 + 960 = 1685
6. Memory
This is Memory test.
Click “Test”, then PE Diag starts Memory test. This is just 10 seconds. But, this tests only limitted
area.
If test is OK, it shows mark.
If test is not OK, it shows mark.
7. Auto
Click “Test”, then start each test.
－3-10－