Panasonic JS-960WP0M51 - Automated and Startup Test Procedures in PE Diag; Auto Test Execution; Startup Test Configuration

8. Auto test
Tests which you chose can be performed collectively only 1 cycle.
8-1. Auto test
If you put the check mark in the boxies each test ahead and click “Execute”, PE Diag start selected
tests collectively automatically.
8-2. Satrt-up test
If you put the check mark in the boxies each test ahead and put the check mark in the box of “Satrt-up
test”, next PE Diag startup timing, PE Diag tests selected tests automatically.
－3-12－