7. Programmable Features
49
Setting recall/flash time
{#}{7}{2}
The recall/flash time depends on your telephone exchange or host PBX.
{1} “900msec”
{2} “700msec” (default)
{3} “600msec”
{4} “400msec”
{5} “300msec”
{6} “250msec”
{7} “200msec”
{8} “160msec”
{9} “110msec”
{*} “100msec”
{0} “90msec”
{#} “80msec”
Note:
L If the unit is connected via a PBX, PBX functions (transferring a call,
etc.) might not work correctly. Consult your PBX supplier for the correct
setting.
Changing the receiving
mode in the manual answer
setting
{#}{7}{3}
{1} “TEL” (default): Telephone mode (page 36)
{2} “TEL/FAX”: Telephone/Fax mode (page 37)
Setting the connecting
tone
{#}{7}{6}
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You can use
these tones to confirm the status of the other party’s machine.
{0} “OFF”: Deactivates this feature.
{1} “ON” (default): You will hear connecting tones.
L If the ring back tone continues, the other party’s machine may not be a
fax machine or may have run out of paper. Check with the other party.
L The connecting tone volume cannot be adjusted.
Changing the TEL/FAX
delayed ring setting
{#}{7}{8}
If you use an extension telephone when this unit is in TEL/FAX mode,
select the desired number of times the extension telephone rings before
the unit answers the call.
{1} “1”
{2} “2” (default)
{3} “3”
{4} “4”
{5} “5”
{6} “6”
{7} “7”
{8} “8”
{9} “9”
Note:
L See page 37 for details.
Setting toner save feature
{#}{7}{9}
{0} “OFF” (default): Deactivates this feature.
{1} “ON”: The toner cartridge will last longer.
Note:
L This feature may lower the print quality by reducing toner consumption.
L This setting is valid for copying, and when the unit automatically prints
reports/lists.
L This setting is invalid for printing received faxes.
Feature/Code Selection
FL323HK-PNQX2241ZA-OI-en.book Page 49 Thursday, August 6, 2009 10:12 AM
To Next Page
Loading...
