1. Introduction and Installation
17
2 Pull the tension plate forward (1).
3 Remove the paper tray cover (1).
4 Insert the paper, print-side down (1).
L The paper should not be over the tabs
(2).
L If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
5 Attach the paper tray cover (1).
6 Push the tension plate back (1).
1
1
2
2
1
Correct Incorrect
1
1
FL611E-PFQX2133ZA-en.book Page 17 Friday, January 28, 2005 11:12 AM
To Next Page
Loading...
