6. Programmable Features
45
Code #79: Setting toner save feature
TONER SAVE
=OFF [±]
“ON”: The toner cartridge will last longer.
“OFF” (default): Deactivates this feature.
Note:
L This feature may lower the print quality by
reducing toner consumption.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
6.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 42 to
page 45.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
6.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 20 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See
page 21 for details.
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 22 for details.
{#}{0}{4} Sending report
– {1}:“ON”
– {2}:“OFF”
– {3}:“ERROR” (default)
{#}{0}{6} FAX ring count
– {1}:“1”
– {2}:“2” (default)
– {3}:“3”
– {4}:“4”
– {5}:“5”
– {6}:“6”
– {7}:“7”
– {8}:“8”
– {9}:“9”
{#}{1}{2} Remote activation ID
– {1}:“ON”
– {2}:“OFF” (default)
FL611E-PFQX2133ZA-en.book Page 45 Friday, January 28, 2005 11:12 AM
To Next Page
Loading...
