8. General Information
63
Specifications
8.2 Specifications
Applicable lines:
Public Switched Telephone Network
Document size:
Max. 216 mm in width, Max. 600 mm in length
Effective scanning width:
208 mm
Effective printing width:
202 mm
Transmission time
*1
:
Approx. 8 s/page (ECM-MMR)
*2
Scanning density:
Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm – in standard resolution,
7.7 lines/mm – in fine/photo/photo with text
resolution,
15.4 lines/mm – in super fine resolution
Photo resolution:
64-level
Scanner type:
Contact Image Sensor
Printer type:
Laser Printer
Data compression system:
Modified Huffman (MH), Modified READ (MR),
Modified Modified READ (MMR)
Modem speed:
14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400
bps; Automatic Fallback
Operating environment:
10 °C – 32.5 °C, 20 % – 80 % RH (Relative
Humidity)
Dimensions:
Approx. height 370 mm × width 430 mm × depth
480 mm
Mass (Weight):
Approx. 9.2 kg
Power consumption:
Standby: Approx. 4 W
Transmission: Approx. 12 W
Reception: Approx. 290 W
Copy: Approx. 290 W
Maximum: Approx. 950 W (When the fuser lamp
turns on)
Power supply:
220 – 240 V AC, 50 Hz
Fax memory capacity:
Approx. 120 pages of memory transmission
Approx. 170 pages of memory reception
(Based on the ITU-T No. 1 Test Chart in standard
resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm – 800 nm
Emission duration: Continuous
Print speed:
Approx. 14 ppm (pages per minute)
Printing resolution:
600 × 600 dpi
*1 Transmission speed depends upon the
contents of the pages, resolution, telephone
line conditions and capability of the other
party’s machine.
*2 Transmission speed is based upon the ITU-T
No. 1 Test Chart. If the capability of the other
party’s machine is inferior to your unit, the
transmission time may be longer.
Note:
L Design and specifications are subject to
change without notice.
ITU-T No.1 Test Chart
FL611E-PFQX2133ZA-en.book Page 63 Friday, January 28, 2005 11:12 AM
To Next Page
Loading...
