32
Sending Faxes
●
Check that ink, paste or correction fluid has dried.
●
Do not send the following types of documents: (Use copies for fax transmission.)
— Paper with a faint image
— Paper with printing on the opposite side that can be seen through the other side (i.e. newspaper)
●
To transmit the document with a width of less than standard letter size (216 mm), we recommend
transmitting the document using the scanner glass.
Using the scanner glass
208 mm
(8
3
⁄16
"
)
271
mm
(10
11
⁄
16
"
)
4 mm 4 mm
Scanned
area
4 mm
4 mm
202 mm
(7
15
⁄16
"
)
289
mm
(11
3
⁄
8
"
)
4 mm 4 mm
Scanned
area
4 mm
4 mm
Scanner glass
Scanner glass
When the paper size is set to “LETTER”: When the paper size is set to “A4”:
TOP TOP
Note:
●
Remove clips, staples or other similar fasteners.
●
Do not send the following types of documents: (Use the scanner glass for fax transmission.)
— Chemically treated paper such as carbon or carbonless duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
Documents you can send!
Using the auto document feeder
600 mm
(23
5
⁄8
"
)
Document width 216 mm (8
1
⁄2
"
)
Minimum size
128 mm
(5
"
)
182 mm
(7
3
⁄16
"
)
Maximum size
216 mm
(8
1
⁄2
"
)
208 mm (8
3
⁄16
"
)
Effective scanning area
4 mm 4 mm
4 mm
4 mm
Scanned
area
Document weight
Single sheet:
45 g/m
2
to 90 g/m
2
(12 lb. to 24 lb.)
Multiple sheets:
60 g/m
2
to 75 g/m
2
(16 lb. to 20 lb.)
Effective scanning area on the scanner glass
Effective scanning area is changed depending on the setting of the paper size (Feature #16 on
page 57).
Note for the auto document feeder and the scanner glass
To Next Page
Loading...
