Storing caller information into one-touch dial
and navigator directory!
Important:
●
This feature is not available in the following cases.
— The telephone number includes data other than numbers (i.e. : or #).
— The caller information does not include a telephone number.
1
Press b.
Example:
2
Press + or - until the desired entry is
displayed.
Example:
3
Press p.
Example:
/
4
For stations 1–3:
Press the desired station key.
Example:
Press w.
Example:
Press w.
Example:
For stations 4–6:
Press the desired station key.
Example:
Press w.
Example:
For stations 7–12:
Press o, then press the desired
station key.
Example:
Press w.
Example:
<S09>=134567890
NAME=SAM LEE
STORE:PRESS SET
<S04>=134567890
NAME=SAM LEE
STORE:PRESS SET
<S01>=134567890
NAME=SAM LEE
STORE:PRESS SET
STATION 1
DIAL MODE [±]
SAM LEE
PRESS NAVI.[
I H
]
SAM LEE
PRESS STATION OR
SAM LEE
Apr. 14 11:50AM
2 NEW CALLS
PRESS NAVI.[+ -]
Note:
●
You can confirm the stored entries on the
telephone number list (p. 75).
●
The unit can only store a name of up to 10
characters long.
●
To edit a name and number, see page 24.
●
If you enter a new entry into a station key, the
previous entry will be overwritten.
●
If you use stations 1–3 as broadcast keys,
you cannot store caller information for
stations 1–3.
For navigator directory:
Press ( or ).
Example:
Press w.
Example:
5
Press w.
REGISTERED
NO.=134567890
NAME=SAM LEE
STORE:PRESS SET
To Next Page
Loading...
