Used for multistation transmission
(p. 35, 36).
Dial keypad Used to print a quick reference (see below).
Display panel
Used to select a resolution (p. 17).
Checks the amount of remaining film (p. 67).
Changes from pulse to tone during dialing (p. 31).
Used as a hookswitch (p. 31).
Used to turn on/off the auto
receive mode (p. 19, 21).
Used for voice muting (p. 15).
Used to initiate fax transmission/reception and copying.
Also used to store a parameter during programming.
Used to stop an operation
or programming.
Adjusts ringer/handset/speaker volumes.
Also used as a cursor key or a selection key
(p. 12, 15, 16).
Used for the speakerphone operation (p. 15).
Used for speed dialing (p. 28, 29).
Used to initiate/exit programming.
Redials the last number dialed.
Also inserts a pause during dialing (p. 31).
Used for one-touch dialing.
Also used as character and
command keys (p. 13, 27, 28).
Used to select a
lower station
(p. 27, 28).
To Next Page
Loading...
