33
Advanced
Operations
1
Insert the documents FACE DOWN.
2
Press (MENU).
Display:
3
Press K, then B E.
4
Press (START/COPY/SET).
5
Press or to select “ON”.
¡If this feature is not required, select “OFF”.
6
Press (START/COPY/SET).
7
Enter the phone number by using regular
dialing, one-touch dialing, speed dialing or the
electronic telephone directory.
8
Press (START/COPY/SET).
9
Enter the transmission start time.
Example: 11:00PM
Press aa @@, then press J to
select PM.
¡You can select AM or PM by
pressing J.
10
Press (START/COPY/SET).
11
Press (MENU).
¡When the programmed time has come, the
unit will automatically start transmission.
SEND AT 11:00PM
TIME=12:00AM
NO.=
MODE=ON [Ÿÿ]
MODE=OFF [Ÿÿ]
DELAYED XMT
SYSTEM SET UP
Delayed transmission
(sending a fax at a later time)
Using a built-in clock, this unit can send documents automatically at a specific time. This allows you to take
advantage of low-cost calling hours offered by your telephone company. The delayed transmission can be
reserved to take place up to 24 hours in advance.
Note:
¡You can receive, transmit and copy
documents while delayed transmission is set.
¡If the programmed time is during a power
failure, delayed transmission will be
attempted soon after power is restored.
¡When transmit polling (see page 32) is ON,
delayed transmission is not available.
FACE DOWN
(MENU)
(START/COPY/SET)
Dial keypad
To Next Page
Loading...
