66
Clearing a document jam
If the unit does not release the original document during feeding, remove the document as follows.
1
Slide the front cover open lever forward to unlock
the front cover and lift to open.
2
Remove the jammed document carefully.
3
Close the front cover securely by pushing down on
both ends.
1
Slide the front cover open lever forward to unlock
the front cover and lift to open.
2
Shift the position of the lever by using an
instrument with a pointed end, like a clip or
ball-point pen.
Position A: When documents do not feed
Position B: Standard position (pre-selected)
Position C: When documents multiple feed
3
Close the front cover securely by pushing down on
both ends.
Front cover open lever
Front cover open lever
Lever
Front cover
Adjusting the feeder pressure
When no feeding or multiple feeding occurs frequently, adjust the feeder pressure.
Front cover
To Next Page
Loading...
