9. Maintenance
55
9.4 Thermal head cleaning
If smudges or black/white lines appear on a
copied/received document, check whether there is dust
on the thermal head. Clean the thermal head to remove
the dust.
Important:
L Remove the recording paper, then remove the
paper tray beforehand, otherwise the paper may
misfeed or jam.
1 Disconnect the mains lead and the telephone line
cord.
2 Open the front cover (1), push the green button
(2), then open the back cover (3).
3 Remove the ink film (4).
4 Clean the thermal head (5) with a cloth moistened
with isopropyl rubbing alcohol, and let it dry
thoroughly.
Caution:
L To prevent a malfunction due to static
electricity, do not use a dry cloth and do not
touch the thermal head directly.
5 Re-install the ink film and close the covers (see step
4 to 7 on page 12).
6 Install the paper tray (page 13), then insert the
recording paper gently (page 14).
7 Connect the mains lead and the telephone line cord.
1
3
2
4
5
FP205-215E-PFQX2485ZA-en.book Page 55 Wednesday, April 26, 2006 6:34 PM
To Next Page
Loading...
