Panasonic KX-FT31BX

46
Receiving Faxes
1
Press .
Display:
2
Press , then .
3
Press .
4
Press or to select “EXT.TAM”.
5
Press .
6
Press .
MENU
SETUP ITEM
[ ]
START/COPY/SET
MODE=EXT.TAM ▼ ▲
MODE=FAX ONLY ▼ ▲
START/COPY/SET
AUTO RECEIVE
0 5
1.SYSTEM SET UP
MENU
Change the AUTO RECEIVE setting from the FAX ONLY mode to the EXT.TAM mode.
1 2 3
4 5 6
7 8 9
0
Dial keypad
MENU
START/COPY/SET
Changing the FAX ONLY mode to the EXT.TAM mode
1
Turn on the external answering machine.
2
Press on the unit until the FAX
indicator light turns on.
Display:
EXT.TAM MODE
AUTO RECEIVE
FAX
AUTO RECEIVE
ON
Activating the EXT.TAM mode
Note:
●
If the answering machine is not turned on, all incoming
calls will be answered by the unit and callers cannot
leave voice messages.
●
Every time the unit receives a document, a silent
pause or fax tone may be recorded on the answering
machine.
●
Set the TEL mode under the following conditions:
—when you wish to set the number of rings on the
answering machine to more than 5, or
—when you wish to use the auto transfer functions
(transfer, pager alert, etc.) on the answering
machine.
●
Automatic fax sending cannot be received
automatically in the TEL mode.
Note:
●
To return to the FAX ONLY mode, select
“FAX ONLY” in step 4.