64
Cleaning
If misfeeding occurs frequently or if dirty patterns or black bands appear on a copied or transmitted document,
clean the document feeder.
Sub roller
White plate
Document feeder rollers
Rubber flap
Glass
Cover
open button
Power cord
Telephone
line cord
1
Disconnect the power cord and the telephone
line cord.
2
Open the cover by pressing the cover open button.
3
Clean the document feeder rollers, sub roller and
rubber flap with a cloth moistened with isopropyl
rubbing alcohol, and let all parts dry thoroughly.
4
Clean the white plate and glass with a soft dry
cloth.
5
Close the cover securely by pushing down on both
corners.
6
Connect the power cord and the telephone line
cord.
Caution:
●
Do not use paper products, such as paper towels
or tissues, to clean the inside of the unit.
Cleaning the document feeder
If dirty patterns or black bands appear on a copied or received document, clean the thermal head.
Thermal head
Cover
open button
Caution:
●
Do not push on the black cover.
1
Disconnect the power cord and the telephone
line cord.
2
Open the cover by pressing the cover open button.
3
Clean the thermal head with a cloth moistened with
isopropyl rubbing alcohol, and let it dry thoroughly.
4
Close the cover securely by pushing down on both
corners.
5
Connect the power cord and the telephone line
cord.
Caution:
●
To prevent a malfunction due to static electricity,
do not use a dry cloth and do not touch the
thermal head directly with your fingers.
Cleaning the thermal head
To Next Page
Loading...
